TemplatesBeginner
Sheet Metal DXF Template
Flat pattern export rules, bend line layers, and hole annotation for laser cutting.
Documentation Team2024-11-247 min read8,7654.8
Summary
Export flat DXF with consistent layers for cut, bend, and hardware. Include k-factor notes in the drawing.
1Layer convention
CUT for outer contour and holes; BEND for bend lines only; no duplicate geometry.
2Scale and units
1:1 mm units; verify no scale factor on import at the shop.
3Bend notes
Reference bend table or k-factor on PDF drawing companion file.
Key points
- Separate CUT and BEND layers
- 1:1 mm flat pattern
- Attach bend table PDF
Sheet metalDXFTemplate
Want the best process recommended for your part?
AI Quote Chat