Video tutorialBeginner
SLA Printing Parameter Tuning
Layer height, exposure, support strategy, and post-cure basics for resin printing.
Additive Team2024-11-2212 min read8,9344.8
Summary
SLA quality depends on layer thickness, exposure time, and support density. Tune for detail vs speed based on part function.
1Layer height
50 µm for fine detail; 100 µm balances speed and surface quality on larger parts.
2Supports
Minimize contact on cosmetic faces; orient critical surfaces away from support scars.
3Post-processing
Wash, dry, and UV/post-cure per resin datasheet to reach final mechanical properties.
Key points
- Thinner layers → finer detail
- Orient for minimal cosmetic supports
- Follow resin cure schedule
SLA3D printingVideo
Need a suitable process for your part?
AI Quote Chat